Key Product Data
Manufacturer: Allen-Bradley / Rockwell Automation
Bulletin: 194E
Catalog Number: 194E-Y32-1753-6G
Product Type: Enclosed IEC Load Switch
UPC: 662468929448
Rated Current: 32 A
Number of Poles: 3
Switching Function: OFF-ON
Operating Angle: 90°
Enclosure Material: Thermoplastic
Enclosure Protection: IP65
NEMA Enclosure Rating: Type 4X
Mounting: Base / DIN rail
Operating Handle: Type G, black/grey
Cable Entries: PG-type cable gland knockouts
Interlockable: Yes
Rated Operational Voltage: Up to 690 V AC (IEC)
Enclosed Switching for Industrial Power Circuits
The 194E-Y32-1753-6G is a 32 A, three-pole IEC load switch from Allen-Bradley's Bulletin 194E range. It combines an OFF-ON switching mechanism with a thermoplastic enclosure, providing a self-contained switching unit for industrial electrical installations.
Unlike an open-base 194E switch that must be installed inside a separate enclosure, this model is supplied as a complete enclosed device. Its IP65 thermoplastic housing is designed for installations where protection against dust and water jets is an important consideration. The Type G black/grey actuator is included, providing a ready-made external operating point.
The 90-degree operating movement provides two switching positions. The device is intended for circuit switching and isolation duties within its electrical ratings, rather than motor reversing or emergency-stop applications.

Enclosure and Operating Arrangement
The enclosure is a defining feature of this catalog number. Its thermoplastic housing provides an IP65 enclosure rating, while the product is also listed with a NEMA Type 4X rating.
The Type G actuator is supplied with the switch, so the basic operating handle does not need to be selected separately. The enclosure includes PG-type cable gland entry knockouts to accommodate suitable cable-entry arrangements.
| Physical Detail | Specification |
|---|---|
| Enclosure width | Approx. 95 mm |
| Enclosure height | Approx. 150 mm |
| Enclosure depth | Approx. 86 mm |
| Enclosure material | Thermoplastic |
| Enclosure protection | IP65 |
| NEMA rating | Type 4X |
| Handle style | Type G, black/grey |
| Cable entry | PG-type knockouts |
| Mechanical operating life | 200,000 operations |
| Interlocking | Supported |
The listed enclosure dimensions apply to the 32 A version. Installation clearances should account for cable glands, connected conductors and the operating space around the handle.
Can't find the version you need?
Electrical Ratings and Load Compatibility
The 194E-Y32-1753-6G has a 32 A UL/CSA continuous-current rating and a 40 A conventional enclosed thermal current rating under IEC conditions. Its IEC conventional free-air thermal current is listed as 50 A.
For load selection, the utilization category is particularly important. Rockwell Automation lists an AC-3 operational power rating of 11 kW at 400 V and an AC-23A rating of 15 kW at 400 V.
| Electrical Characteristic | Published Rating |
|---|---|
| UL/CSA continuous current | 32 A |
| Conventional enclosed thermal current (Ie) | 40 A |
| Conventional free-air thermal current (Ith) | 50 A |
| Rated operational voltage (IEC) | Up to 690 V AC |
| AC-3 operational power at 400 V | 11 kW |
| AC-23A operational power at 400 V | 15 kW |
| Rated frequency | 60 Hz |
| Rated insulation voltage (Ui) | 690 V |
| Rated impulse withstand voltage (Uimp) | 8 kV |
| Short-circuit coordination | 35 A maximum fuse rating for Type 2 coordination at 400/415 V |
These values describe different rating conditions and should not be treated as interchangeable current ratings. The actual selection must follow the applicable utilization category, operating voltage, load characteristics and short-circuit coordination requirements.
Where This Enclosed Switch Is Used
The 194E-Y32-1753-6G is suitable for industrial equipment and machinery installations that require a local three-pole switching point in a dedicated enclosure.
Typical application scenarios include:
- Local machine isolation: Installed near machinery to provide an accessible OFF-ON switching point for the equipment's three-phase supply.
- Motor-driven equipment: Used in suitable motor circuits where the AC-3 rating and motor operating conditions are within the switch's published limits.
- Industrial equipment panels: Applied as an enclosed switching unit for individual equipment sections or power branches where a separate enclosure is preferred.
- Maintenance and service access: Provides a local switching device for maintenance arrangements, subject to the equipment's isolation and lockout procedures.
- Dust- and water-exposed installations: Its IP65 thermoplastic enclosure makes it relevant to locations where the switching device needs a higher degree of environmental protection than an open-type switch can provide.
The switch is listed by Rockwell Automation for use as a main switch and a maintenance/service switch. It is not identified as an emergency-stop installation or reversing switch. A suitable protective device must still be provided separately.

Wiring and Installation Considerations
The main circuit uses screw terminals. The published conductor ranges are:
| Conductor Type | Supported Size |
|---|---|
| Rigid conductors | 1.5–16 mm² (14–8 AWG) |
| Fine-stranded conductors | 1.5–10 mm² (14–8 AWG) |
| Terminal tightening torque | 1.4 N·m |
The enclosure uses PG-type cable-entry knockouts. Suitable cable glands and installation accessories should be selected to maintain the required enclosure protection after wiring.
Although the complete device is rated IP65, the switch body itself is listed as IP20 at the motor-rating condition. The IP65 rating applies to the enclosed assembly, so cable entries, glands and installation details are important to maintaining the intended protection level.
Comparing Enclosed and Open 194E Versions
The 194E-Y32-1753-6G should not be confused with open-type 32 A Bulletin 194E switches. The basic switching function may be similar, but the physical installation and enclosure arrangements differ.
| Catalog Number | Construction | Main Difference |
|---|---|---|
| 194E-Y32-1753-6G | Enclosed, thermoplastic | IP65 enclosure, Type G handle included |
| 194E-A32-1753-6G | Open-base / DIN rail | No enclosed housing; Type G actuator included |
| 194E-E32-1753-6G | Open front/door | Designed for front/door mounting; Type G actuator included |
The Y version is the enclosed option for installations requiring a dedicated housing. The A and E versions are open-type devices intended for different mounting arrangements. They should not be treated as direct mechanical replacements without checking the enclosure, mounting and wiring requirements.
Questions to Check Before Replacement
Does the 194E-Y32-1753-6G include its enclosure?
Yes. Rockwell Automation identifies it as a complete device in a thermoplastic enclosure, supplied with a Type G black/grey actuator.
What is the enclosure protection rating?
The enclosed device is rated IP65 and is also listed as NEMA Type 4X. The switch body's own protection classification is different from the enclosure rating.
Is this a 32 A, three-phase switch?
It is a three-pole device with a 32 A UL/CSA continuous-current rating. The applicable motor and load ratings depend on the utilization category and operating voltage.
Can it be used as a motor reversing switch?
No. This catalog number has a 3-pole OFF-ON switching configuration, not a reversing arrangement.
Can it replace 194E-A32-1753-6G?
Not as a direct physical replacement in every installation. The Y version includes an enclosure, while the A version is an open-base/DIN-rail device. Check mounting space, cable entry, wiring and enclosure requirements before substitution.
Hot Tags: 194e-y32-1753-6g allen-bradley 32a enclosed iec load switch, China 194e-y32-1753-6g allen-bradley 32a enclosed iec load switch suppliers, manual motor protector, motor control assembly, motor electronic protection relay, motor overload protection relay, motor protection device, short circuit motor protector


