194E-A32-1753 Allen-Bradley 32A IEC Load Switch

194E-A32-1753 Allen-Bradley 32A IEC Load Switch

Allen-Bradley 194E-A32-1753 is a 32 A, 3-pole IEC load switch with base/DIN-rail mounting and 90° OFF-ON operation.
Fast industrial automation parts supply to reduce downtime.
Delivery in 1–5 days. One-year warranty.
Send Inquiry
Description

Key Product Data

 

 

Manufacturer: Allen-Bradley / Rockwell Automation
Catalog Number: 194E-A32-1753
Bulletin: 194E
Product Type: IEC Load Switch

UPC: 662072554357
Rated Current: 32 A
Number of Poles: 3
Switching Function: OFF-ON
Operating Angle: 90°
Mounting: Open-base / DIN rail
Enclosure Type: Open
Handle Color: Grey / Black
Actuator: Selected separately
Front Protection: IP20

 

A Compact Three-Pole Switching Device for Industrial Power Circuits

 

The 194E-A32-1753 is a 32 A, three-pole load switch from Allen-Bradley's Bulletin 194E range. It provides a straightforward OFF-ON switching function for controlling and isolating three-phase electrical circuits.

 

Its open-base construction supports installation on a mounting base or DIN rail within an appropriate electrical enclosure. The 90-degree operating movement provides two clearly defined positions, making it suitable for equipment where a local switching point is required for normal operation or maintenance isolation.

 

This catalog number identifies the switch body with its operating shaft. The actuator is selected separately, so the required handle arrangement should be considered when specifying the complete installation.

Installation diagram of Allen-Bradley PLC automation accessories.jpg
 

 

Ratings and Switching Characteristics

 

For applications requiring a three-phase load switch, the 32 A rating is only one part of the selection. The associated utilization category, operating voltage, load characteristics and installation conditions should also be checked.

 

Rockwell Automation's Bulletin 194E selection information lists the 32 A, three-pole OFF-ON version with an AC-23A rating of 15 kW at 690 V AC, 50 Hz, and a 15 HP rating at 480 V AC, three-phase, 60 Hz. These figures provide useful application references, but the actual suitability of the switch must be assessed against the motor or load being controlled.

 

The switch uses a 90-degree OFF-ON operating arrangement. It is intended for switching between the open and closed positions, rather than reversing motor direction or providing a multi-position changeover function.

 

Mounting, Wiring and Physical Fit

 

The A32 version is the base/DIN-rail mounting configuration in the 194E-A32-1753 catalog designation. It should not be confused with the 194E-E32-1753, which is the corresponding front/door-mounted version.

 

Rockwell Automation lists the following mechanical and wiring details for this model:

 

Installation Detail Specification
Switch body width Approx. 45 mm
Switch body height Approx. 64 mm
Switch body depth Approx. 59 mm
Rigid conductor range 1.5–16 mm² (14–8 AWG)
Fine-stranded conductor range 1.5–10 mm² (14–8 AWG)
Terminal tightening torque 1.4 N·m
Mechanical operating life 200,000 operations
Front-side protection IP20

 

The dimensions refer to the switch body at the 32 A rating. Allowance should also be made for the selected actuator, operating shaft arrangement, conductor routing and enclosure clearances.

 

Can't find the version you need?

Please contact us.

 

Typical Applications in Industrial Equipment

 

The Allen-Bradley 194E-A32-1753 can serve as a local switching and isolation point in industrial electrical installations where a three-pole OFF-ON device is required. Its 32 A rating makes it relevant to appropriately sized three-phase circuits in machinery and control-panel assemblies.

 

Common application scenarios include:

 

  • Machinery power isolation: Installed in a machine's incoming or branch power circuit to provide a local means of switching the three-phase supply OFF or ON.
  • Motor circuit switching: Used as a switching device in suitable motor circuits, provided the motor's rated power, starting characteristics and applicable utilization category remain within the switch's ratings.
  • Control panel distribution: Applied to individual equipment sections or auxiliary power branches where a dedicated three-pole switching point is needed.
  • Maintenance isolation points: Provides a local switching position that can be incorporated into an equipment isolation arrangement. Where personnel safety or lockout procedures require it, the complete installation must include the appropriate isolation and locking provisions.

 

What to Check for Each Application

 

The suitability of the 194E-A32-1753 depends on more than its 32 A nominal current rating. For motor-related applications, check the motor power and operating voltage against the switch's AC-23A ratings. For other loads, assess the applicable utilization category and switching duty.

 

The switch should also be coordinated with the circuit's overcurrent protection. It does not replace a circuit breaker, fuse or motor overload relay, and it should not be selected as the sole protective device for a motor or power circuit.

 

Choosing the Correct 194E Version

 

Several 194E catalog numbers share the same 32 A rating and three-pole OFF-ON function. Their mounting arrangements and actuator configurations are not necessarily the same.

 

Catalog Number Main Difference
194E-A32-1753 Open-base / DIN-rail mounting; actuator selected separately
194E-E32-1753 Open front/door mounting; actuator selected separately
194E-A32-1753-R Base/DIN-rail version supplied with a Type R red/yellow actuator
194E-A32-1753-Q Base/DIN-rail version supplied with a Type Q black/grey actuator

 

The actuator-equipped versions are separate catalog numbers. Their inclusion here is for identification when checking an existing installation, not an indication that the handles are interchangeable in every application.

 

Before ordering a replacement, compare the complete catalog number and check the mounting method, operating handle, shaft arrangement and required switching function.

 

Schematic diagram of automated PLC accessories.jpg
 
 

Where This Load Switch Fits

The 194E-A32-1753 can be used as a main or maintenance/service switching device in suitable industrial electrical assemblies. Typical applications include local isolation points for machinery, control panels and three-phase equipment.

 

Its open construction means it is intended for installation within a suitable enclosure or assembly rather than use as a standalone enclosed disconnect switch. The switch body itself is rated IP20 at the front side; the protection of the completed installation depends on the enclosure and overall assembly design.

 

It is also important to distinguish a load switch from a circuit breaker. The 194E-A32-1753 provides switching and isolation functions; it should not be treated as an overcurrent protective device.

 

Replacement Checks Before Ordering

 

When replacing an installed Bulletin 194E switch, verify these points against the original device:

 

  • Current rating: Confirm that the required switch rating is 32 A.
  • Pole arrangement: This model is a three-pole device.
  • Switching function: Confirm the 90-degree OFF-ON operation.
  • Mounting format: Check that the existing installation uses the base/DIN-rail arrangement rather than front/door mounting.
  • Actuator and shaft: Confirm whether the installation requires a separately selected actuator or a specific supplied handle.
  • Electrical application: Check the operating voltage, utilization category and connected load before selecting the replacement.

 

A matching current rating alone does not establish that another 194E variant is a suitable replacement.

 

Frequently Asked Questions

 

Is the 194E-A32-1753 a three-phase load switch?
Yes. It is a three-pole IEC load switch intended for switching three-phase circuits within its applicable ratings.

 

Does the 194E-A32-1753 include an operating handle?
Rockwell Automation identifies the actuator as a separate selection for this catalog number. Check the required handle and shaft arrangement when ordering.

 

What is the difference between 194E-A32-1753 and 194E-E32-1753?
The A version is designed for open-base/DIN-rail mounting, while the E version is designed for open front/door mounting. Both are 32 A, three-pole OFF-ON switches.

 

Can this switch provide motor overload protection?
No. It provides a switching and isolation function, not motor overload or short-circuit protection. Appropriate protective devices must be provided separately.

 

What does the 1753 suffix indicate?
In the Bulletin 194E catalog structure, 1753 identifies a three-pole, two-position OFF-ON switching function with a 90-degree operating angle.

Hot Tags: 194e-a32-1753 allen-bradley 32a iec load switch, China 194e-a32-1753 allen-bradley 32a iec load switch suppliers, DIN rail motor starter, electronic motor protector, motor control assembly, motor protection device, motor stall relay, motor voltage protection