100-C12EJ10 Allen-Bradley IEC 12 A Contactor

100-C12EJ10 Allen-Bradley IEC 12 A Contactor

Allen-Bradley 100-C12EJ10 is a 12 A IEC contactor with a 24 V DC electronic coil and 1NO auxiliary contact.
Fast industrial automation parts supply to reduce downtime.
Delivery in 1–5 days. One-year warranty.
Send Inquiry
Description

Technical Specifications

 

Manufacturer: Allen-Bradley
Catalog Number: 100-C12EJ10
Product Family: Bulletin 100-C
Device Type: IEC Contactor

UPC: 662074832194
Rated Operational Current (AC-3): 12 A
Motor Power Reference: 5.5 kW at 400/415 V AC
Number of Poles: 3
Main Contact Arrangement: 3 Normally Open (3NO)
Auxiliary Contact Configuration: 1 Normally Open (1NO), 0 Normally Closed (0NC)
Control Coil Voltage: 24 V DC
Coil Technology: Electronic, Low-Consumption Type
Coil Connection Position: Line Side
Terminal Connection: Screw Terminals
Package Quantity: 1
Lifecycle Status: Active

 

A Different Coil Design Within the 100-C Family

 

The 100-C12EJ10 uses a 24 V DC electronic coil. This is an important distinction when identifying the correct version of a Bulletin 100-C contactor.

 

The EJ coil code belongs to Allen-Bradley's electronic, low-consumption DC coil range. It should not be confused with the DJ designation used for a DC coil with an integrated diode. Although both versions operate from a 24 V DC control supply, their coil technologies are different.

 

This distinction matters when replacing an existing device. A contactor with the same general appearance and control voltage may still have a different coil arrangement. The complete catalog number should therefore be checked against the original equipment documentation.

Electrical automation PLC accessory diagram.jpg

 

Where the 12 A Version Fits

 

The 100-C12EJ10 occupies the 12 A AC-3 position in the Bulletin 100-C range. Its published motor power reference is 5.5 kW at 400/415 V AC.

 

This rating provides a useful starting point when evaluating the device for a motor starter, but it is not a substitute for checking the actual motor nameplate. The selected contactor must suit the motor's operating current, supply voltage, utilization category and switching conditions.

 

In practical terms, the 12 A version is relevant when an installation calls for a higher AC-3 current rating than the 9 A size, while retaining a compact three-pole contactor format. The final selection should still be based on the complete electrical duty rather than the difference in ampere ratings alone.

 

Can't find the version you need?

Please contact us.

 

Three Main Poles, One Additional Control Contact

 

The 100-C12EJ10 combines three main normally open poles with one normally open auxiliary contact.

 

These contact groups have separate jobs within an electrical assembly. The main poles switch the connected power circuit, while the auxiliary contact can provide an additional switching state for a control function.

 

For example, a control designer may use an auxiliary contact as part of a contactor-state feedback or holding arrangement. The exact function depends on the external control circuit; the auxiliary contact is not a fourth motor-power pole.

 

The supplied configuration has one NO auxiliary contact and no NC auxiliary contact. This detail should be checked whenever the contactor is being selected for an existing panel or specified in a replacement-parts list.

 

Ordering Details

 

The complete catalog number for this version is 100-C12EJ10, with UPC 662074832194. Rockwell Automation currently lists it as an Active product and identifies the ordering option as a single pack.

 

For purchasing departments maintaining a spare-parts register, keeping the catalog number and UPC together can help distinguish this model from other 12 A Bulletin 100-C contactors. The coil code and auxiliary-contact arrangement should also be retained in the equipment record, particularly where several versions are installed across different machines.

 

Test the wiring of the PLC system.jpg

Checking the Connection Arrangement Before Installation

 

The 100-C12EJ10 is supplied with screw terminals and a line-side coil connection. Both details can affect how the contactor fits into an existing control assembly.

 

The line-side coil position is particularly relevant when comparing it with other versions in the same family. A model with a load-side coil connection may have the same general electrical purpose but a different wiring arrangement.

 

The 24 V DC control supply must also be compatible with the electronic coil. When changing from one coil technology to another, verify the control-circuit design rather than assuming that matching voltage figures alone establish compatibility.

 

Related Configurations Worth Distinguishing

 

 

The following Bulletin 100-C catalog numbers illustrate two different configuration choices at the same 12 A rating.

 

Catalog Number Coil Type / Connection Auxiliary Contact
100-C12EJ10 24 V DC electronic, Line Side 1 NO
100-C12EJ01 24 V DC electronic, Line Side 1 NC
100-C12UEJ10 24 V DC electronic, Load Side 1 NO

 

The 100-C12EJ01 is the relevant option to check when an installation requires a normally closed auxiliary contact instead of the normally open contact supplied with the 100-C12EJ10. The 100-C12UEJ10 has the same 1NO auxiliary arrangement but a different coil connection position.

 

These catalog numbers should be treated as distinct ordering configurations. A similar rating does not establish that the devices can be substituted without checking the control wiring and installation requirements.

 

Frequently Asked Questions

 

What is the main difference between the 100-C12EJ10 and a DJ coil version?

The 100-C12EJ10 uses an electronic low-consumption 24 V DC coil. The DJ designation identifies a DC coil configuration with an integrated diode. They should not be treated as the same coil technology.

 

Is the 100-C12EJ10 suitable for three-phase motor switching?

It is rated for AC-3 squirrel-cage motor starting and stopping, with a 12 A operational-current rating. The motor's actual current and operating conditions must be checked before selection.

 

Does the contactor include an NC auxiliary contact?

No. The 100-C12EJ10 is supplied with one normally open auxiliary contact and zero normally closed auxiliary contacts.

 

What does the line-side coil connection mean?

It identifies the position of the coil connection on the contactor. This matters when matching the unit to existing wiring or comparing it with a load-side version.

 

Is the 100-C12EJ10 the same as the 100-C12EJ01?

No. Both use a 24 V DC electronic coil with line-side termination, but the 100-C12EJ10 has a 1NO auxiliary contact, whereas the 100-C12EJ01 has a 1NC auxiliary contact.

 

What is the UPC for this catalog number?

The UPC assigned to the 100-C12EJ10 is 662074832194.

 

Is this Allen-Bradley contactor still active?

Yes. Rockwell Automation currently lists the 100-C12EJ10 as Active.

Hot Tags: 100-c12ej10 allen-bradley iec 12 a contactor, China 100-c12ej10 allen-bradley iec 12 a contactor suppliers, DIN rail motor starter, electronic motor protector, motor protection device, reduced voltage starter, short circuit motor protector, soft starter