Key Product Data
Manufacturer: Allen-Bradley / Rockwell Automation
Catalog Number: 199-MSMD1
Product Family: 199-MSM
Component Type: Diode Surge Suppressor
UPC: 662072550205
Suppression Circuit: Diode
Control Voltage Range: 12–250 V DC
Connection Version: Two-wire
Package Quantity: 10
Country of Origin: Switzerland
Lifecycle Status: Active
A Small Component with a Specific Job in DC Control Circuits
The 199-MSMD1 is a diode suppressor used in DC electromagnetic coil circuits. Its purpose is to limit the voltage transient produced when an energized coil is switched off.
This effect occurs in devices such as contactors and relays. When the coil supply is interrupted, the magnetic field collapses and generates an induced voltage across the coil. The resulting transient can place additional electrical stress on the switching circuit.
The 199-MSMD1 provides a diode path for suppressing this turn-off voltage. It is a coil-circuit accessory rather than a general-purpose surge protection device for incoming power lines or distribution circuits.

Where It Is Used
The 199-MSMD1 appears in several Rockwell Automation product contexts, which makes identifying the actual application important when sourcing a replacement.
- Bulletin 100-M contactors: Listed as a diode suppressor for compatible DC coil applications in the 100-M accessory documentation.
- Bulletin 700-M control relays: Used as a DC diode suppressor for applicable relay coil circuits.
- PowerFlex 755 On-Machine Packaged Drives: The Rockwell installation manual identifies the 199-MSMD1 as the DC brake surge suppressor used with the mechanical brake contactor in the specified drive configuration.
The last application is particularly useful when identifying an existing component inside a PowerFlex 755 On-Machine Packaged Drive. The manual describes removing the old suppressor from the brake contactor and installing the replacement in the same location.
Compatibility should still be checked against the exact contactor, relay or drive configuration. The fact that the same catalog number appears in several product documents does not mean it fits every DC coil.
Choosing Between Diode, R-C and MOV Suppressors
The 199-MSMD1 is one of several suppressor options in the Allen-Bradley 199-MSM range. The key distinction is the suppression technology and the type of control supply.
| Catalog Number | Suppression Type | Published Voltage Range |
|---|---|---|
| 199-MSMA48 | R-C | 24–48 V AC |
| 199-MSMA1 | R-C | 110–280 V AC |
| 199-MSMV1 | MOV | 12–55 V AC / 12–77 V DC |
| 199-MSMV2 | MOV | 56–136 V AC / 78–162 V DC |
| 199-MSMV3 | MOV | 137–277 V AC / 163–350 V DC |
| 199-MSMD1 | Diode | 12–250 V DC |
These are not interchangeable alternatives simply because some of their voltage ranges overlap. The suppressor must match the coil supply type, voltage, connection arrangement and equipment requirements.
For example, the 199-MSMD1 is intended for DC circuits. It should not be substituted for an R-C suppressor specified for an AC coil.
Can't find the version you need?
Installation Details That Matter
The 199-MSMD1 is a two-wire diode suppressor. Its connection must follow the polarity and wiring instructions for the associated coil circuit.
A diode suppressor is polarity-sensitive. Incorrect wiring can create an unintended current path when the DC supply is energized. Before installation, verify the coil voltage, connection points and equipment-specific wiring diagram.
In the PowerFlex 755 On-Machine Packaged Drive manual, Rockwell describes the 199-MSMD1 being inserted into the front of the brake contactor, with its text positioned upright. The manual also specifies a screwdriver connection procedure and terminal tightening torque for that particular brake contactor installation. Those instructions should not automatically be applied to unrelated contactor or relay arrangements.
Ordering Quantity and Identification
Rockwell Automation lists the 199-MSMD1 with a package quantity of 10. The Bulletin 100-M accessory documentation specifies that this catalog number must be ordered in multiples of 10.
When purchasing for maintenance stock or a replacement job, confirm whether the supplier's sales unit is an individual suppressor or a complete factory package. The manufacturer's package quantity is 10 pieces.
The UPC associated with this catalog number is 662072550205.

Before Replacing an Existing Suppressor
A replacement should be selected by matching the original device and its application, not just by comparing the voltage range.
Check these details:
- Confirm that the coil circuit uses DC power.
- Verify that the coil voltage is within the 12–250 V DC range.
- Check whether the existing suppressor is a two-wire diode version.
- Confirm the contactor, relay or brake contactor model.
- Follow the equipment-specific polarity and wiring instructions.
- Check the required package quantity when ordering.
The 199-MSMD1 suppresses coil-generated switching transients. It does not replace a circuit breaker, fuse, motor overload relay or a power-line surge protective device.
Frequently Asked Questions
What does the 199-MSMD1 suppress?
It limits the voltage transient generated when a compatible DC electromagnetic coil is de-energized.
Is it suitable for AC coils?
No. It is a diode suppressor specified for 12–250 V DC applications. AC coil circuits require the appropriate suppression type.
Is the 199-MSMD1 used in PowerFlex drives?
Yes. Rockwell Automation's PowerFlex 755 On-Machine Packaged Drive manual identifies it as the DC brake surge suppressor in the specified mechanical brake contactor arrangement.
How many pieces are included in the manufacturer's package?
Rockwell lists a package quantity of 10 and specifies ordering in multiples of 10 in the Bulletin 100-M accessory documentation.
Can it replace an MOV or R-C suppressor?
Not as a general substitution. These suppressors use different circuit technologies and have different AC/DC voltage ranges and application requirements.
Hot Tags: 199-msmd1 allen-bradley diode surge suppressor, China 199-msmd1 allen-bradley diode surge suppressor suppliers, AC motor contactor, magnetic motor protector, magnetic motor starter, motor monitoring relay, motor protection solution, motor voltage protection


