Key Product Data
Model: 199-LF1
Brand: Allen-Bradley
Manufacturer: Rockwell Automation
Product Type: Oversize Terminal Lug
Product Family: Bulletin 199 Terminal Lug Kits
Associated Product Family: Bulletin 194R Disconnect Switch Accessories
UPC: 662072235584
Lug Configuration: Terminal lug kit
Package Quantity: 3 pieces
Compatible Equipment: Selected 194R fused and non-fused disconnect switches
Additional Application References: Selected Bulletin 150 SMC and Bulletin 193 assemblies
Lifecycle Status: Active
Country of Origin: India

Product Overview
The Allen-Bradley 199-LF1 is an oversize terminal lug kit designed for power conductor connections in compatible industrial switching and motor control equipment. It provides a mechanical termination point for larger conductors where the standard terminal arrangement requires an appropriately sized lug accessory.
Rockwell Automation identifies the 199-LF1 under its 194R legacy fused disconnect switch accessory range. The accessory is also referenced in Rockwell installation documentation for selected Bulletin 150 SMC equipment and Bulletin 193 assemblies.
The kit contains three terminal lugs, making it suitable for equipment configurations requiring three corresponding power-terminal connections. Its purpose is to provide a secure conductor-to-terminal connection, rather than to perform switching, circuit protection or overload control.
The complete catalog number is important when sourcing this component. Other 199-series lug kits have different terminal dimensions, conductor capacities and equipment applications. A similar-looking lug should not be assumed to have the same mechanical or electrical suitability.
Terminal Connection and Conductor Accommodation
The 199-LF1 is intended for applications requiring an oversize terminal lug arrangement. Its selection should be based on the conductor size, terminal geometry and equipment connection requirements.
Some distributor listings describe the 199-LF1 as accepting conductors from 6 AWG to 250 kcmil. However, Rockwell installation documentation for specific SMC applications lists a conductor range of 16–120 mm² (#6–4/0 AWG).
These specifications should not be treated as universally interchangeable. The permissible conductor range depends on the equipment application and its associated terminal arrangement. For this reason, the exact equipment catalog number and the relevant installation instructions should be checked before using a particular conductor size.
Where the 199-LF1 Is Used
The 199-LF1 appears in more than one Rockwell equipment documentation context.
194R fused and non-fused disconnect switches
Rockwell lists this product as an accessory for its legacy 194R fused disconnect switch range. It is used as a terminal lug component for compatible disconnect configurations.
Bulletin 150 SMC equipment
Rockwell installation documentation identifies the 199-LF1 for selected SMC equipment, including specified 97–135 A and 180–360 A configurations. The documented conductor capacity and terminal arrangement must be followed for the particular SMC installation.
Selected Bulletin 193 assemblies
Rockwell's terminal lug kit documentation also references 199-LF1 in connection with specified Bulletin 193 configurations. Compatibility should be checked against the full equipment catalog number rather than inferred from the Bulletin number alone.
Can't find the version you need?
Installation Considerations
Correct installation is essential because the terminal lug forms part of the equipment's power connection.
Before selecting or installing the 199-LF1, check the following:
- Equipment compatibility: Confirm that the switch or controller documentation identifies 199-LF1 as an approved lug option.
- Conductor size: Match the conductor to the range specified for the particular equipment installation.
- Terminal arrangement: Verify the lug dimensions and connection geometry against the equipment terminal.
- Tightening torque: Use the torque value specified in the applicable installation manual. Do not assume that one torque value applies to every application.
- Number of lugs: Confirm the required quantity for the line-side and load-side connections.
For example, Rockwell's SMC installation documentation specifies a tightening torque of 31 N·m (275 lb-in) for the 199-LF1 connection in the documented application. This value should not automatically be transferred to a different 194R installation without checking its applicable instructions.
199-LF1 Compared with Other 199 Terminal Lug Kits
The Bulletin 199 terminal lug family includes several models for different conductor and equipment requirements.
|
Catalog Number |
Product Type |
General Application |
|---|---|---|
|
199-LE1 |
Terminal Lug Kit |
Selected smaller terminal configurations |
|
199-LF1 |
Oversize Terminal Lug Kit |
Selected 194R, 150 and 193 equipment configurations |
|
199-LG1 |
Terminal Lug Kit |
Larger terminal configurations |
|
199-LH1 |
Terminal Lug Kit |
Selected larger equipment connections |
|
199-LJ1 |
Terminal Lug Kit |
Selected larger equipment connections |
The 199-LF1 is not a universal replacement for the other 199-series lug kits. The correct part depends on terminal dimensions, conductor requirements and the equipment being connected.

Typical Applications
- Industrial fused disconnect switch assemblies
- Non-fused disconnect switch installations
- SMC-50 solid-state motor controller power connections
- Selected Bulletin 193 motor control assemblies
- Replacement of existing oversize terminal lugs
- Industrial power wiring requiring compatible lug termination hardware
Frequently Asked Questions
1. What is the Allen-Bradley 199-LF1?
The 199-LF1 is an oversize terminal lug kit manufactured by Rockwell Automation for compatible industrial disconnect and motor control equipment.
2. How many terminal lugs are included?
The manufacturer's product description specifies a package quantity of three terminal lugs.
3. Which equipment uses the 199-LF1?
Rockwell identifies it as a 194R legacy fused disconnect switch accessory. Its technical documentation also references the 199-LF1 for selected Bulletin 150 SMC and Bulletin 193 equipment configurations.
4. What conductor sizes can the 199-LF1 accommodate?
Some product listings specify 6 AWG to 250 kcmil. However, Rockwell's SMC installation documentation lists 16–120 mm² (#6–4/0 AWG) for particular applications. The allowable range must be verified against the installation documentation for the exact equipment.
5. Is the 199-LF1 a complete disconnect switch?
No. It is a terminal lug accessory. The disconnect switch provides the electrical switching and isolation function, while the lug provides the conductor termination connection.
6. Can the 199-LF1 be used with an SMC-50 controller?
Rockwell installation documentation identifies it for selected SMC configurations. The controller's current rating, terminal arrangement and applicable installation instructions should be checked before ordering.
7. Is the 199-LF1 supplied as a single lug?
No. The manufacturer's listed package quantity is three pieces.
8. Is the Allen-Bradley 199-LF1 still an active product?
Yes. Rockwell Automation currently lists the 199-LF1 as Active. Its UPC is 662072235584.
Product Identification and Ordering
The catalog number 199-LF1 identifies the Allen-Bradley Oversize Terminal Lug Kit.
- Manufacturer: Allen-Bradley / Rockwell Automation
- Catalog Number: 199-LF1
- UPC: 662072235584
- Product Description: Oversize Terminal Lug
- Package Quantity: 3 pieces
- Lifecycle Status: Active
When sourcing this component, verify the full equipment catalog number and terminal requirements. The 199-LF1 is used across several documented equipment configurations, but the allowable conductor size and installation requirements must be confirmed for the specific application.
Hot Tags: 199-lf1 allen-bradley oversize terminal lug, China 199-lf1 allen-bradley oversize terminal lug suppliers, disconnect terminal block, distribution busbar, ground terminal block, industrial junction box, sub distribution board, terminal block assembly



