Key Product Data
Model: 194E-HE4N-175
Brand: Allen-Bradley
Manufacturer: Rockwell Automation
Product Series: Bulletin 194E
Product Type: IEC Load Switch Actuator
Actuator Type: Type N
UPC: 611320707106
Compatible Switch Rating: 16 A
Switching Configuration: OFF-ON, two-position
Switching Angle: 90°
Handle Color: Red
Legend Plate Color: Yellow
Legend Marking: 0-1
Legend Plate Size: 48 × 48 mm
Mounting: Front / door mounting
Actuator Fixing: Screw mounting
Padlock Provision: Up to 3 padlocks
Lifecycle Status: Active
Product Overview
The Allen-Bradley 194E-HE4N-175 is a Type N actuator designed for Bulletin 194E IEC load switches. It provides the external operating interface for a compatible 16 A load switch, allowing the operator to manually change the switch position through a red control knob mounted on a yellow legend plate.
Its two-position OFF-ON arrangement uses a 90-degree operating movement. The legend marking 0-1 identifies the two switching positions, making the operating state easier to recognize on a control panel or electrical enclosure door.
This actuator is a mechanical operating accessory rather than a complete load switch. It does not independently interrupt electrical current or provide circuit protection. Its function is to operate the compatible switch mechanism through the associated mounting arrangement.
The 194E-HE4N-175 is particularly relevant when assembling or replacing the external operating handle of a Bulletin 194E load switch. Its Type N configuration, 48 × 48 mm legend plate and padlocking provision distinguish it from other actuator styles in the 194E/194L accessory range.

Operating Design and Panel Interface
Red handle with yellow legend plate
The contrasting red and yellow design provides a visible operating interface. The red control knob identifies the manual operating point, while the yellow plate carries the 0-1 position marking.
Two-position OFF-ON operation
The actuator is configured for a 90-degree movement between the OFF and ON positions. The 0-1 legend corresponds to these two operating states.
Door-mounted installation
The actuator is designed for front or door mounting, with screw fixing. This arrangement allows the operator to access the switch from the enclosure exterior while the load switch mechanism is installed within the panel.
Padlocking provision
The handle incorporates provision for up to three padlocks. This allows the OFF position to be secured as part of an appropriate lockout procedure, helping prevent unintended operation during maintenance. The actual isolation and lockout procedure must still follow the installation's safety requirements.
Can't find the version you need?
Compatibility with Bulletin 194E Load Switches
The 194E-HE4N-175 is specifically identified for use with 194E 16 A load switches. It should not be treated as a universal operating handle for every Bulletin 194E or 194L switch.
When selecting a replacement actuator, the following details should be checked:
- Load switch family and rated current
- Actuator type and mounting arrangement
- Legend plate dimensions
- Operating position and switching angle
- Padlocking requirements
The Type N designation is important because different actuator types within the 194E/194L family have different operating and mounting arrangements.
Related Actuator Configurations
|
Catalog Number |
Actuator Type |
Intended Application |
|---|---|---|
|
194E-HE4N-175 |
Type N |
16 A Bulletin 194E switch |
|
194E-HE4G-175 |
Type G |
16 A Bulletin 194E switch |
|
194L-HE4A-175 |
Type A |
16–100 A switch range |
|
194L-HE6N-175 |
Type N |
25–100 A switch range |
These catalog numbers are not interchangeable solely because they share a similar appearance. The switch family, mounting arrangement and actuator configuration must match.
Where This Actuator Is Used
The 194E-HE4N-175 is intended for installations where a compatible Bulletin 194E load switch requires an external manual operating handle.
Typical applications include:
- Industrial electrical distribution panels
- Enclosed IEC load switch assemblies
- Machine electrical control cabinets
- Manual power isolation arrangements
- Replacement of damaged or missing load switch handles
- Panel installations requiring a padlockable OFF position
Its role is to provide a clear and accessible mechanical operating interface, not to perform the electrical switching function independently.

Understanding the Actuator and Load Switch Relationship
An important distinction when sourcing this product is the difference between the actuator and the load switch itself.
|
Component |
Function |
|---|---|
|
194E-HE4N-175 |
External operating handle and position indication |
|
Bulletin 194E Load Switch |
Electrical switching and load isolation |
|
Associated Mounting Arrangement |
Connects the external actuator to the switch mechanism |
The 194E-HE4N-175 should therefore be ordered as an actuator accessory when the required component is the external operating handle. If the electrical switching mechanism itself needs replacement, the appropriate load switch catalog number must be identified separately.
Frequently Asked Questions
1. What is the Allen-Bradley 194E-HE4N-175?
It is a Type N IEC load switch actuator for Bulletin 194E load switches. It features a red handle, yellow legend plate and 0-1 position marking.
2. Which load switches are compatible with the 194E-HE4N-175?
It is specified for use with 194E 16 A load switches. Compatibility should be checked against the complete switch and actuator configuration.
3. What do the 0-1 markings mean?
The markings identify the two operating positions: 0 represents OFF and 1 represents ON. The actuator uses a 90-degree switching movement.
4. Can the handle be locked in the OFF position?
The actuator provides a locking provision for up to three padlocks. This supports securing the switch in the OFF position as part of an appropriate lockout procedure.
5. Is the 194E-HE4N-175 a complete disconnect switch?
No. It is the external actuator only. The compatible Bulletin 194E load switch provides the electrical switching function.
6. What is the size of the legend plate?
The manufacturer's product description specifies a 48 × 48 mm legend plate. Some distributor listings describe the overall plate or mounting dimensions differently, so the official actuator drawing should be used when checking panel cutout and installation clearances.
7. What is the difference between 194E-HE4N-175 and 194E-HE4G-175?
Both are Type-specific actuator configurations for 16 A Bulletin 194E switches, but they have different actuator styles. The correct version should be selected according to the required operating arrangement.
8. Is the 194E-HE4N-175 still an active product?
Yes. Rockwell Automation currently lists the 194E-HE4N-175 as Active. Its UPC is 611320707106.
Product Identification and Ordering
The complete catalog number 194E-HE4N-175 identifies the Allen-Bradley Type N IEC load switch actuator with a red/yellow design, 48 × 48 mm legend plate and 0-1 operating marking.
- Manufacturer: Allen-Bradley / Rockwell Automation
- Catalog Number: 194E-HE4N-175
- UPC: 611320707106
- Compatible Switch: Bulletin 194E, 16 A
When sourcing this item, verify the Type N actuator configuration and the compatible 16 A switch rating. A similar-looking actuator from another Bulletin 194E/194L configuration may have different mounting or operating characteristics.
Hot Tags: 194e-he4n-175 allen-bradley iec load switch actuator, China 194e-he4n-175 allen-bradley iec load switch actuator suppliers, cable terminal block, grounding terminal block, industrial distribution panel, industrial switchboard, power switchboard, wiring terminal box


