Key Product Data
Manufacturer: Allen-Bradley / Rockwell Automation
Product Family: ArmorStart
Bulletin: 284D
Catalog Number: 284D-FVD4P0B-10-CR-EMI
Drive Type: Distributed AC Variable Frequency Drive
UPC: 781180672200
Communication Network: DeviceNet
Input Voltage: 380–480 V AC, three-phase
Input Frequency: 50/60 Hz
Rated Output Current: 4.0 A
Motor Power Rating: 1.5 kW / 2 HP
Control Voltage: 240 V AC
Enclosure: Cast aluminium, NEMA Type 4 / IP67
Control Method: Sensorless Vector Control and Volts/Hertz
Motor Connection: Conduit entrance with motor cable supplied
Motor Cable: 3 m unshielded, single-ended, 90° male cordset
Short-Circuit Protection Rating: 10 A rated device
EMI Filter: Included
Lifecycle Status: Discontinued – October 8, 2024
A Distributed Drive for Machine-Level Motor Control
The 284D-FVD4P0B-10-CR-EMI belongs to Allen-Bradley's Bulletin 284 ArmorStart distributed drive family. Rather than placing all motor-control hardware inside a central electrical cabinet, ArmorStart equipment allows the drive to be installed closer to the machinery it controls.
This arrangement is useful in production systems with multiple motor-driven sections. Each drive can regulate the speed of its assigned motor while communicating operating and control information through DeviceNet.
The model combines a 4.0 A variable-frequency drive with a cast-aluminium enclosure rated IP67. Its conduit-entry arrangement and supplied motor cable support machine-side installation where a separately mounted drive cabinet may not be the preferred layout.

Electrical Configuration: 380–480 V Input, 4 A Output
This catalog number is configured for three-phase 380–480 V AC input. Its rated output is 4.0 A, corresponding to a 1.5 kW (2 HP) motor rating at the specified voltage range.
The 240 V AC designation in the model description refers to the control voltage. It should not be confused with the three-phase main power input.
| Electrical Parameter | Rating |
|---|---|
| Main supply | 380–480 V AC |
| Supply phases | 3-phase |
| Supply frequency | 50/60 Hz |
| Rated output current | 4.0 A |
| Motor power | 1.5 kW / 2 HP |
| Control voltage | 240 V AC |
| Maximum output frequency | 400 Hz |
| Typical drive efficiency | 97.5% |
| Short-circuit protection rating | 10 A rated device |
The 10 A value is the rated short-circuit protection device specification, not the drive's motor output current. Motor selection should be based on the 4.0 A output rating and the actual motor nameplate data.
Sensorless Vector Control and Speed Regulation
The 284D-FVD4P0B-10-CR-EMI supports both sensorless vector control and Volts/Hertz operation. These control methods allow the drive to adjust motor output frequency and voltage according to the selected application requirements.
In sensorless vector mode, the published speed regulation is ±1% of base speed across a 60:1 speed range under the specified conditions. The drive also provides two independently programmable acceleration and deceleration times, each adjustable from 0 to 600 seconds in 0.1-second increments.
Additional control functions include:
- Eight preset speeds
- Programmable skip frequencies
- Multiple stop modes, including coast, DC braking and S-curve stopping
- StepLogic functionality
- Class 10 electronic motor overload protection
- I²t overload protection, rated at 150% for 60 seconds and 200% for 30 seconds
These functions support motor speed regulation and control within the capabilities of the drive. Actual performance depends on the selected control mode, motor characteristics and application setup.
Can't find the version you need?
DeviceNet Communication at the Machine
DeviceNet is the communication network specified for this model. It allows the ArmorStart drive to exchange control and status information with a compatible automation controller.
The published DeviceNet communication parameters include:
| Network Parameter | Specification |
|---|---|
| Communication protocol | DeviceNet |
| Nominal network supply | 24 V DC |
| Permitted network voltage | 11–25 V DC |
| Supported baud rates | 125, 250 and 500 kbps |
| Maximum network distance | 500 m at 125 kbps |
The drive also provides four digital inputs and two digital outputs. These I/O points can support local control and equipment-status functions within the configured system.
This is a DeviceNet model, not an EtherNet/IP version. When replacing an installed unit, the existing network architecture and controller configuration should be checked before selecting another ArmorStart model.
Machine-Side Installation and Environmental Protection
The 284D-FVD4P0B-10-CR-EMI uses a cast-aluminium enclosure rated NEMA Type 4 and IP67. This construction is intended for distributed installation in industrial environments where dust and water exposure are relevant considerations.
The motor connection is specified as a conduit entrance with a supplied 3 m unshielded, single-ended cable and 90-degree male connector. This connection arrangement is part of the model configuration and should be considered when matching the drive to the existing motor wiring.
| Mechanical Detail | Specification |
|---|---|
| Enclosure material | Cast aluminium |
| NEMA rating | Type 4 |
| IP rating | IP67 |
| Approximate shipping weight | 19.1 kg |
| Approximate width | 420.38 mm |
| Approximate height | 287.5 mm |
| Approximate depth | 266.9 mm |
| Recommended disconnect lock shackle | 8 mm (5/16 in) |
The dimensions are approximate and include the conduit-entry configuration. Cable routing and mounting clearances should be checked against the installation drawing.
Applications in Distributed Motor Control Systems
This ArmorStart drive is intended for machinery where adjustable motor speed and distributed control are required. Its combination of DeviceNet communication, sensorless vector control and an IP67 enclosure makes it relevant to machine-level motor applications.
Typical application areas include:
- Conveyor sections: Regulating the speed of individual conveyor motors within a larger production or material-handling line.
- Packaging machinery: Controlling motor-driven machine sections that require adjustable operating speeds and network-based coordination.
- Material handling equipment: Integrating local motor control into distributed equipment layouts.
- Production machinery: Managing speed and acceleration profiles for individual motor-driven processes.
- Machine-mounted drive installations: Placing the drive near the motor rather than relying entirely on a central control cabinet.
These are application examples for the product family and its control capabilities. The specific motor, load, operating environment and network configuration must be checked before selecting the drive.

EMI Filter and Protection Considerations
The final EMI designation identifies the integrated EMI filter option. This is relevant in installations where conducted electromagnetic interference from variable-frequency drive operation needs to be managed.
The filter does not eliminate the need for proper motor-cable routing, grounding and installation practices. Rockwell Automation also identifies Class A conducted emissions and Class A, Group 1 radiated emissions for this model.
The drive includes electronic motor overload protection, but its 10 A rated short-circuit protection device specification should not be confused with a complete statement of every external protection requirement. Circuit protection and installation coordination must follow the applicable Rockwell documentation and electrical codes.
Discontinued Product and Replacement Considerations
Rockwell Automation lists the 284D-FVD4P0B-10-CR-EMI as discontinued, effective October 8, 2024. The manufacturer identifies its replacement category as Engineering Replacement rather than specifying a direct drop-in replacement on the product page.
For maintenance or equipment restoration, matching the original catalog number may be important where the existing installation depends on DeviceNet, the 240 V AC control supply, the 4.0 A output rating, the conduit-entry motor connection and the EMI filter configuration.
A newer ArmorStart product should not be assumed to be a direct substitute simply because it provides similar motor power. Network protocol, enclosure, control voltage, connection media, I/O and control functions all need to be compared.
Frequently Asked Questions
What is the rated output current of the 284D-FVD4P0B-10-CR-EMI?
The rated output current is 4.0 A, with a 1.5 kW (2 HP) motor rating.
Does this model use DeviceNet or EtherNet/IP?
It uses DeviceNet communication. It is not an EtherNet/IP model.
Is the main input voltage 240 V AC?
No. The main power input is three-phase 380–480 V AC. The 240 V AC specification refers to the control voltage.
What does the EMI suffix indicate?
It identifies the EMI filter option included in this configuration.
Is the drive suitable for outdoor or washdown-area installation?
Its IP67 and NEMA Type 4 enclosure ratings provide protection for demanding industrial environments. Final suitability depends on the complete installation, exposure conditions and applicable enclosure requirements.
Is the 284D-FVD4P0B-10-CR-EMI still available as a current Rockwell product?
No. Rockwell Automation lists it as discontinued effective October 8, 2024. Replacement selection should be based on the complete electrical, mechanical and communication configuration.
Hot Tags: 284d-fvd4p0b-10-cr-emi allen-bradley armorstart distributed variable frequency drive, China 284d-fvd4p0b-10-cr-emi allen-bradley armorstart distributed variable frequency drive suppliers, AC motor drive, adjustable speed motor controller, closed loop drive, open loop drive, torque control drive, variable speed drive


