FECA-01 ABB 3AUA0000072069 EtherCAT Adapter Module

Model: FECA-01
Brand: ABB
Product ID: 3AUA0000072069

EAN: 6438177272281
Product Type: EtherCAT Fieldbus Adapter Module
Product Family: F-Series Fieldbus Adapters
Communication Protocol: EtherCAT
Supported Drive Profiles: CANopen DSP 402 and ABB Drives Profile
Communication Function: Drive control, monitoring and data exchange
Compatible Drive Families: ACS355, ACS380, ACS480, ACS580, ACH580, ACQ580, ACS880 and DCS880
Selling Unit: 1 piece

ABB identifies FECA-01 as an EtherCAT adapter for compatible ABB drives and lists CANopen DSP 402 and the ABB Drives Profile as supported drive profiles. Compatibility should be confirmed against the specific drive model and firmware.

FECA-01 is an ABB F-Series fieldbus adapter that adds EtherCAT communication to compatible ABB drive systems. It provides a communication interface between a supported drive and an EtherCAT-based automation network, enabling cyclic process-data exchange for drive commands, status monitoring and control.

The module is intended for installations requiring real-time communication and synchronization between automation controllers and drives. ABB documents support for both the CANopen DSP 402 Device Profile for Drives and Motion Control and the ABB Drives Profile, allowing the adapter to operate within different supported control architectures.

EtherCAT is a real-time industrial Ethernet fieldbus designed for fast data exchange and synchronization. With FECA-01 installed in a compatible ABB drive, control commands and drive feedback can be exchanged over the fieldbus rather than relying solely on conventional hardwired signals.

The adapter implements EtherCAT-specific functions, including its state machine, synchronization management, watchdogs, addressing modes and Fieldbus Memory Management Units (FMMUs). These functions support the coordinated exchange of process data between the EtherCAT network and the drive.

ABB's current FECA-01 product information lists compatibility with the following drive families:

• ACS355
• ACS380
• ACS480
• ACS580
• ACH580
• ACQ580
• ACS880
• DCS880
• DCT880

Compatibility varies by drive model and applicable documentation. Before ordering, check the relevant drive manual and adapter compatibility information to confirm support for the intended installation.

FECA-01 supports two documented drive communication profiles:

• CANopen DSP 402: A standardized device profile for drives and motion-control applications.
• ABB Drives Profile: ABB's drive-specific communication profile for supported control and monitoring functions.

The appropriate profile depends on the controller, drive configuration and network project. When replacing an adapter, confirm the profile used by the existing system and check the configuration of the EtherCAT master before commissioning the replacement.

 

 

Replacement and Ordering Considerations

The full ABB product identifier for this module is 3AUA0000072069, with FECA-01 as the global commercial alias and EAN 6438177272281.

 

When sourcing a replacement, verify the adapter type, drive compatibility and communication profile. FECA-01 should not be confused with RECA-01, which is a different ABB EtherCAT adapter associated with other drive families.

FECA-01
ABB FECA-01
3AUA0000072069
FECA01
ABB EtherCAT Adapter FECA-01
FECA-01 EtherCAT Adapter Module
ABB F-Series EtherCAT Adapter
ABB Drive EtherCAT Adapter
FECA-01 Fieldbus Adapter
EAN 6438177272281

What is the ABB FECA-01?

FECA-01 is an ABB EtherCAT fieldbus adapter module used to connect compatible ABB drives to an EtherCAT-based automation network.

Which communication profiles does FECA-01 support?

It supports the CANopen DSP 402 drive profile and the ABB Drives Profile. The profile used depends on the drive and control-system configuration.

Which ABB drives are compatible with FECA-01?

ABB lists compatible families including ACS355, ACS380, ACS480, ACS580, ACH580, ACQ580, ACS880, DCS880 and DCT880. Check the model-specific documentation before purchasing.

Is FECA-01 the same as RECA-01?

No. They are different ABB EtherCAT adapter models. ABB lists RECA-01 for certain older drive families, while FECA-01 supports a different range of drives. Confirm the exact adapter specified for the installed drive.

What is the product ID and EAN?

The ABB product ID is 3AUA0000072069, and the EAN is 6438177272281.

What should be checked before replacing FECA-01?

Confirm the installed drive model, supported adapter type, configured drive profile and EtherCAT master settings. These details help ensure that the replacement module matches the existing communication arrangement.

• Model: FECA-01
• Manufacturer: ABB
• Product ID: 3AUA0000072069
• Product Description: EtherCAT Adapter Module
• EAN: 6438177272281
• Selling Unit: 1 piece

For replacement procurement, use the complete FECA-01 model designation and ABB product ID. Verify compatibility with the specific drive model before selecting the adapter.

Hot Tags: feca-01 abb 3aua0000072069 ethercat adapter module, China feca-01 abb 3aua0000072069 ethercat adapter module suppliers, industrial adjustable speed controller, regenerative VFD system, variable torque drive system, VFD control system, VFD motor control system, VSD control system